| Comment by: DaveyW (118.92.72.233) | At: 03 Sep 2013, 02:15 | File version: 0.999 |
My Epson Perfection 1250 is now recognised and can generate a preview. The problem is the colours are all wrong.
|
| |
| |
| Comment by: stanglnator (86.32.151.140) | At: 12 Jul 2013, 17:04 | File version: 0.999 |
@CygnusED
My System: X1000 OS4.1.6 and Epson1260 Latest AmiCygnix and Libusb.
|
| |
| |
| Comment by: CygnusEd (82.115.114.199) | At: 11 Jul 2013, 23:07 | File version: 0.999 |
@stanglnator
So the "plustek" backend does not work for you? This backend was successfully tested with some other scanners (LiDE 30, Canon MP620). I have my doubts, that it is a problem of Sane/Xsane. What is your hardware configuration?
|
| |
| |
| Comment by: stanglnator (86.32.151.140) | At: 11 Jul 2013, 14:56 | File version: 0.999 |
Same freeze with my Epson1260Photo.
1 Try Xsane or a other Backend see my Scanner.
Try a Preview -> Freeze
2. Try only the Two Virtual Devices.
|
| |
| |
| Comment by: DaveyW (118.92.137.120) | At: 02 Dec 2012, 02:55 | File version: 0.998 |
Got hold of an Epson Perfection 1250. Seems to recognise it OK, but when I try to scan it seems to freeze.
|
| |
| |
| Comment by: CygnusEd (82.115.114.199) | At: 28 Nov 2012, 19:14 | File version: 0.998 |
This is the correct library.
Had a look at the sane homepage. The scanner is not supported, even the original Linux backend from HP (hpaio) does not support this model :-(
|
| |
| |
| Comment by: DaveyW (118.92.137.120) | At: 28 Nov 2012, 07:57 | File version: 0.998 |
@CygnusEd
libusb.library v 0.1.12 20,072 bytes.
Thanks. I guess Printer/Scanners are not compatible, only pure scanners?
|
| |
| |
| Comment by: CygnusEd (82.115.114.199) | At: 25 Nov 2012, 17:06 | File version: 0.998 |
@DaveyW
Which version of libusb.library do you have installed? You need version 0.1.12.
It is not enough that it is listed under "Printer". It must be listed under "Vendor Specific" as a scanner device.
|
| |
| |
| Comment by: DaveyW (118.93.18.196) | At: 25 Nov 2012, 00:55 | File version: 0.998 |
Thanks for the reply jabirulo.
I have libUSB.library installed.
USB stack is certainly running under AOS. I guess its running under AmiCygnix as I can access flash drives.
I can see the printer listed under USBInspector "DeskJet 1050 J410 series" under Printer and Vendor Specific
|
| |
| |
| Comment by: jabirulo (83.40.213.207) | At: 24 Nov 2012, 12:31 | File version: 0.998 |
@DaveyW
Did you check if you have in LIBS: that library installed?
libusb.library 20072 bytes
version libusb.library file full
libusb.library 0.1.12 (27.May.2008)
And the USB stack started? ;-)
Can you "see" under AOS4.1 the scanner (USBInspector)?
|
| |
| |
| Comment by: jabirulo (83.40.213.207) | At: 24 Nov 2012, 12:29 | File version: 0.998 |
Hi, too difficult to add support fot SCSI scanners, I have a HP Scanjet4p :-)
|
| |
| |
| Comment by: DaveyW (118.93.179.223) | At: 29 Sep 2012, 02:15 | File version: 0.998 |
Does anyone know how to get this to work? I have a HP 1050 scanner. When I run xsane, it says "Scanning for devices" but only finds 2 virtual devices. I have installed this package and the frontends.
|
| |
| |
Audio (343)